NEW SHARP SVX-160 5-AXIS CNC VERTICAL MACHINING CENTER
Year
Not provided
Stock #
14655
Condition
New
Keep Scrolling To Learn More
Specifications
Equipped With
NEW SHARP SVX-160 5-AXIS CNC VERTICAL MACHINING CENTER
- 25.2" x 17.1" x 23.6" travel (X,Y,Z)
- 6.3" Trunnion table with A and C axis travel.
- 12,000 rpm, CAT 40, 15 HP
- Fanuc 31i-B5 control, also available Heindenhain or Siemens control
- 24 T ATC, Arm type
- High precision Cross Roller Guideways.
| SHARP SVX-160 | ||
| SPECIFICATIONS | UNIT | |
| Control | ||
| Fanuc | 31i-B5 | |
| Screen Size | 10.4" | |
| *Siemens, Heidenhain control are also available | ||
| Travel | ||
| X axis travel | inch (mm) | 25.2" (640) |
| Y axis travel | inch (mm) | 17.1" (435) |
| Z axis travel | inch (mm) | 23.6" (600) |
| A axis travel | Degree | -120 ~ 20° |
| C axis travel | Degree | 360° |
| Spindle nose to table (A=0°) | inch (mm) | 3.9"-20.7" (100-510) |
| Spindle center to column | inch (mm) 19.3" (490) | |
| Table | ||
| Table area | inch (mm) | 6.3" (160) |
| Max workpiece wt. | lb (kg) | 60 (132) |
| T-Slot (Width x Degree) | 0.47"x 45° (12 x 45°) | |
| Spindle | ||
| Speed | rpm | 12,000 |
| Taper | CAT40 | |
| Bearing | Ceramic bearing | |
| Type | Direct Drive | |
| Spindle oil chiller | Oil Type | |
| Feed Rate | ||
| Rapid traverse X/Y Axis | ipm (mm/min) | 1,417 (36,000) |
| Rapid traverse Z Axis | ipm (mm/min) | 1,417 (36,000) |
| Cutting feed rate | ipm (mm/min) | 0.04-393 (1-10,000) |
| Transmission | Direct Drive | |
| Motor | ||
| Spindle motor | Hp (Kw) | 10/15 (7.5/11) |
| Automatic Tool Changer | ||
| ATC capacity | 24 | |
| Method of tool selection | Set tool number | |
| ATC type | Arm type, CAT40 | |
| Max tool diameter | inch (mm) | 2.9" (75) |
| Max. tool length | inch (mm) | 5.9" (150) |
| Max. Tool weight | lb (kg) | 15.4 (7) |
| Without adjacent tool | inch (mm) | 5.9" (150) |
| Air blast at tool change | OK | |
| Accuracy | ||
| X, Y, Z axis: Position | inch (mm) | +/-0.0002" (0.0015") |
| X, Y, Z axis:Repeatability | inch (mm) | +/-0.00012" (0.0015") |
| A axis: Position | arc seconds | +-10 |
| A axis: Repeatability | arc seconds | +-4 |
| C axis: Position | arc seconds | +-10 |
| C axis: Repeatability | arc seconds | +-8 |
| Machine measurements | ||
| Floor space | inch (mm) | W: 79"(2020) x D:86" (2,200) |
| Height | inch (mm) | 107.9" (2,740) |
| Weight | lb (kg) | 8,200 (3,760) |
| Door opening | inch (mm) | 29.5" (759) |
| Coolant system | ||
| Flood coolant nozzles | 6 | |
| Coolant tank capacity | gal (L) | 42 (160) |
| Chip Conveyor | Hinge type | |
| Air blower nozzle (for cutting dry) | 1 | |
| Power requirement | ||
| Electrical | 220V/60 Hz | 3 Phase/45 KVA |
| Air | 6 CFM @ 88psi | |
Standard Accessories
- Fanuc 31i-B5 Control, 10.4" color LCD
- Fanuc 2-year warranty
- AICC II (200 block look ahead)
- Manual guide I
- USB port
- Embedded Ethernet
- RS-232C Interface
- 2 MB memory
- 3 Dimensional cutter
- 3D interference check
- High-speed smooth TCP
- Rigid tapping
- 3 axis (X,Y,Z) linear scale
- 2 axis (A/C) rotary encoder
- Tool setter
- Work piece probe
- Spindle air blast (Auto)
- Electric cabinet heat exchanger
- Spindle oil chiller
- Oil skimmer
- Hinge type chip conveyor with bucket
- Fully enclosed splash guard
- Coolant system-240L tank capacity
- Coolant Through Spindle preparation (70 Bar)
- Coolant Gun, air gun
Attachments
There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.
