Equipped With

40" X 120" ACRA MODEL 40120FCH PRECISION GAP BED ENGINE LATHE

• Multi-Start threads indexing device.
• Forced lubrication system of Spindle is employed by a Pump.
• Drum type brake system for main motor connected to the pedal with a brake wire.
• Cross Slide is hardened and ground to prolong operational life.
• Spindle bore is 4-1/8″
• Spindle nose is D1-11
• Spindle is supported by three bearings.
• Rapid traverse for longitudinal
• Foot-operated braking system.
• Powerful and easy to operate Tailstock.
• Width bed is 560 mm (22.04”).
• Quill diameter is 100 mm(3.93”).
• Hardened and precisely ground.
• Tailstock body can easy to move by special design.


Specifications:
Capacity:                                        40″/52″ x 120″
Swing Over Bed:                            40-3/16″
Swing Over Cross Slide:                30-15/16″
Swing In Gap:                                52-3/8″
Distance Between Centers:           120″
Bed Width:                                     22″
Spindle Nose:                                D1-11
Spindle Bore:                                 4-1/8″
Taper of Spindle:                           MT NO.5
Spindle Speeds – Steps:                16
Spindle Speeds – Range:               12 ~ 1,200 RPM
Cross Slide Travel:                          21-1/4″
Compound Slide Travel:                8-5/8″
Inch Threads:                                 2 ~ 28 TPI
Metric Threads:                              1 ~ 14 mm
Longitudinal Feeds:                       0.0024″~0.0337″
Cross Feeds:                                 1/2 Half of Longitudinal Feeds
Tailstock:
     Quill Diameter:                         3-13/16″
     Quill Travel:                              11″
     Quill Taper:                               MT NO.6
Spindle Drive Motor:                     20 HP x 4P
Voltage:                                         220V/440V AC /3 PH
Weight                                          15,298 lbs
Standard Equipment:
• Dead Center MT#6
• Rapid Traverse
• Coolant System
• Work Light
• Tool box and Service kits
• Leveling screws and Foundation pads
• Multi-position length stop