Equipped With

33" X 80" ACRA MODEL 3380FCH PRECISION GAP BED ENGINE LATHE

• Multi-Start threads indexing device.
• Forced lubrication system of Spindle is employed by a Pump.
• Drum type brake system for main motor connected to the pedal with a brake wire.
• Cross Slide is hardened and ground to prolong operational life.
• Spindle bore is 4-1/8″.
• Spindle nose is D1-11.
• Spindle is supported by three bearings.
• Rapid traverse for longitudinal.
• Foot-operated braking system.
• Powerful and easy to operate Tailstock.
• Width bed is 560 mm (22.04”).
• Quill diameter is 100 mm(3.93”).
• Hardened and precisely ground.
• Tailstock body can easy to move by special design.


Specifications:
Capacity:                                          33″/46″ x 80″
Swing Over Bed:                              30-7/8″
Swing Over Cross Slide:                   24″
Swing In Gap:                                   46-1/16″
Distance Between Centers:              80″
Bed Width:                                       22″
Spindle Nose:                                   D1-11
Spindle Bore:                                    4-1/8″
Taper of Spindle:                              MT NO.5
Spindle Speeds – Steps:                  16
Spindle Speeds – Range:                 12 ~ 1,200 RPM
Cross Slide Travel:                            21-1/4″
Compound Slide Travel:                   8-5/8″:
Inch Threads:                                    2 ~ 28 TPI
Metric Threads:                                1 ~ 14 mm
Longitudinal Feeds:                          0.0024″~0.0337″
Cross Feeds:                                     1/2 Half of Longitudinal Feeds
Tailstock:
     Quill Diameter:                            3.9″
     Quill Travel:                                 11″
     Quill Taper:                                  MT NO.6
Spindle Drive Motor:                        20 HP x 4P
Voltage:                                            220V/440V AC /3 PH
Weight                                              10,320 lbs
Standard Equipment:
• Dead Center MT#6
• Rapid Traverse
• Coolant System
• Work Light
• Tool Box and Service kits
• Leveling screws and Foundation pads
• Multi-position length stop