Equipped With

TSUGAMI S206 CNC SWISS LATHE WITH EDGE MAGAZINE BARFEED

New: 2011

Specifications:
Capacity:  19.05 mm
Axis Configuration:  8-Axis
Machine Type:  Convertible Swiss Lathe

Main Spindle Speed:  200 – 12,000 RPM
Main Spindle Motor:  2.2 / 3.7 kW
Main Spindle Indexing:  Full C-Axis

Sub-Spindle Speed:  200 – 12,000 RPM
Sub-Spindle Motor:  1.5 / 2.2 kW
Sub-Spindle Indexing:  Full C-Axis

Maximum Bar Diameter:  20 mm (3/4 in)
Maximum Machining Length:  210 mm (Direct Drive Rotary GB)
250 mm (Static Guide Bushing)
80 mm (Carrier Type Rotary GB)
45 mm (Bushingless)

Maximum Drilling Diameter:  10 mm
Maximum Tapping Diameter:  M8
Deep Hole Drilling Diameter:  8 mm

Maximum Back Spindle Chucking Diameter:  20 mm
Maximum Back Spindle Drilling Diameter:  8 mm
Maximum Back Spindle Tapping Diameter:  M6

Tool Spindle Drilling Capacity:  6 mm (Front / Back Tool Post)
8 mm (Rear Tool Post)

Tool Storage Capacity:  24 Standard / 35 Maximum
Tool Size:  12 × 12 × 100 mm

Rapid Traverse Rate:  32 m/min
(X1, Y1: 24 m/min / Y2: 15 m/min)

Tool Spindle Speed:  200 – 8,000 RPM

Power Requirements:  14.3 kVA
Compressed Air Requirement:  0.4 MPa or Above
Air Discharge Rate:  40 NL/min

Machine Dimensions:  83 in × 47 in × 74 in
Machine Weight:  7,055 lbs

Equipped with:
Fanuc 31iTB CNC Control
Edge Technologies Magazine Bar Loader
Fire Suppression System
MP High Pressure Coolant Unit
Work Light Tower

Rotary Guide Bushing
(Non-Guide Bushing Kit Available from OEM)

Live Tools on Front & Rear Tool Posts
Backworking Live Tools for Y2 Axis