Equipped With

Oak Model RECB-M3-160, Return, Elbow and Crossover Bender

New 1991

SPECIFICATIONS: 

Machine Description:           Makes Return Bends and Elbow Bends (90 Degrees Or Less.)

Cycles Per Minute:             12 for Return Bends

                               10 for Elbows

                               8 for Crossover Bends

Cut-Off Type:                  Saw Blade

Pieces Per Cycle:              (3) Three at 3/8" OD or Less, Two @ 0.500" or Above.

Equipped With: 

Complete Controls

Setup with 1/2-x 1.25" .025 wall copper

Tooling for 3/8"x 1.0" .025 wall copper

Also included:

Oak sizer Model SM-M7-30

year: 1980

GRAV-I-FLO Return Bend Deburr & Clean Machine Assembly

Return Bend Deburr & Clean Machine, Grav-I-Flo

REF #: 11291-HK 

Model: GVM-15S

Year: 1991

Electrical:            220/440 volt / 60 Hz / 3Ph

Physical Dimensions

Bender:  88" L x 66" W x 72" H