NEW SHARP SV-2517SZ-F BOX WAY CNC VERTICAL MACHINING CENTER
Year
Not provided
Stock #
14636
Condition
New
Keep Scrolling To Learn More
Specifications
Equipped With
NEW SHARP SV-2517SZ-F BOX WAY CNC VERTICAL MACHINING CENTER
- 25” x 17” x 18” travel
- Hardened and ground Box ways with TURCITE coating
- 8,000 rpm, CAT 40 spindle
- 16 tools carousel type ATC
- Fanuc Oi-MF control panel with embedded Ethernet, RS232 port, USB port and Flash Drive port. (standard)
- Pre-tensioned, double anchored, ball screws mounted on high precision angular contact bearings (ABEC 7), eliminate chatter and vibrations during heavy cutting.
- Vertical head is equipped with 2 adjustable coolant nozzles, one adjustable air nozzle, 4 coolant openings and 4 air curtain openings under the spindle. There is also the air purge system that blows out chips at each tool change (standard)
- Chip wash nozzles are installed at each side of machine base (standard)
- Rigid taping, auto lube, thermal control system, coolant gun, air gun, interlock doors (standard)
- Machine wt. 8,200 lbs
| Box Way Vertical Machining Center | SV-2517SE-F |
| Work Capacity | |
| Travel X,Y,Z | 25.2" x 17.1" x 23.6" |
| Spindle Nose to Table | 3.9" - 27.6" |
| Spindle Center to Column | 19.3" |
| Work Table | |
| Table Area | 27.5" x 16.5" |
| Spindle | |
| Spindle Taper | CAT 40 |
| Spindle Max. Speed | 8,000 rpm |
| Driving Type | Belt Drive |
| Motor (30m/cont.) | 10 / 15 HP (7.5 / 11 kw) |
| Automatic Tool Changer (ATC) | |
| Magazine type | Side Mount |
| Magazine Capacity | 24 |
| Max. Tool Diameter | 3.9" |
| w/o adj. tool, max dia. | 5.9" (150mm) |
| Max Tool Length9.8" | |
| Max Tool Weight | 15.4 lbs (7kg) |
| Air Blast at Tool Change | Standard |
| Motion | |
| Cutting Feed Rate | 0.04 - 393.7 IPM |
| Rapid Traverse | X / Y / Z: 787 IPM |
| Accuracy | |
| Positioning Accuracy | 0.00016 " |
| Repeatability Accuracy | 0.00012 " |
| CNC Control Features | |
| Controller | Fanuc Oi-MF |
| Programming Assist | Manual Guide |
| 4th Axis Support | Standard |
| Screen Size | 8.4 LCD |
| Coolant System | |
| Flood Coolant Nozzles | 2 |
| Coolant Tank Capacity | 42 gal. |
| Chip Pan | Standard |
| Power Requirement | |
| Electrical | 220V/3 Phase/20 KVA/60 Hz |
| Air | 6 CFM @ 88 psi |
| Machine Measurements | |
| Floor Space | 80" x 87" |
| Height | 99" |
| Door Opening | 28.4" |
| Weight | 8200 Lbs |
STANDARD ACCESSORIES
- Fanuc Oi-mate-MF control and drives with ; USB port, 512 K memory, Embedded Ethernet, RS-232C interface, 4 additional M codes, M30 Auto Power Off
- Full metal enclosure with 2 large side doors
- Coolant system with enlarged coolant tank
- Coolant gun
- Auto lubrication system
- Rigid tapping
- Air gun
- Removable electronic hand wheel (MPG)
- Door interlock
- Chip pan
- Air accumulator
- Heat exchanger for electric cabinet
- Florescent work light
OPTIONAL ACCESSORIES
- 4th axis software from Fanuc
- 4th axis kit prepped ( electrics, cables unit)
- 4th axis with rotary table (complete with drives, motor)
- Scrapper type chip conveyor
- Hinge type chip conveyor
- Oil skimmer
- Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
- CTS 20 bar/70 bar (300/1,000 psi) pump with tank
- Tool Probe (Renishaw TS27R)
- Tool Setter (Renishaw OMP40
Attachments
There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.
