KENT USA AD-20 DRILLING TYPE EDM- NEW
Year
Not provided
Stock #
14536
Condition
New
Keep Scrolling To Learn More
Specifications
Equipped With
KENT USA AD-20 DRILLING TYPE EDM- NEW
PRODUCT FEATURES
- Digital display and numeric operational controls with 10 separate memory sets for job and parameter settings provide quick and easy set ups.
- Drilling time preset for simple and easy operation during multi-hole drilling.
- Large electrode range, from ø0.3 – ø3.0mm, permits drilling on a wide range of materials such as hard metal alloy, stainless, cooper, aluminum, etc.
- Distilled water can be used as the dielectric fluid, saving cost and conventional dielectric fluid disposal issues.
STANDARD ACCESSORIES
Electrode chuck ø0.2mm - ø3.0mm (1 pc)
Electrode guide ø1.0mm (1 pc)
Brass pipe ø1.0mm (10 pc)
Toolbox with standard tools
Filter unit (1 pc)
OPTIONAL ACCESSORIES
Digital readout (DRO) system for auto depth setting
Electro guide ø0.3mm - ø3.0mm in 0.1mm steps (Each piece)
Electro pipe ø0.3mm - ø3.0mm in 0.1mm steps (Each piece)
Filter replacement unit
Precision electrode chuck (0.2 – 3.0mm)
Air compressor0
SPECIFICATIONS
| Work Table | 8.3" x 18.9" |
| Table Travel (X Axis) | 11.8" |
| Cross Travel (Y Axis) | 7.9" |
| Ram Servo Travel (Z1 Axis) | 13.6" |
| Max Work Piece Weight | 440 Lbs |
| Electrode Pipe Diameter | Ø0.0078" - Ø0.91" |
| Guider To Work Table Distance | 3.1" - 8.3" |
| Max. Machining Current | 30A |
| Current Setting | 9 Steps |
| Pulse Time On | 9 Steps |
| Pulse Time Off | 9 Steps |
| Dielectric Tank Capacity | 7.9 Gal |
| Power Requirements | 220/440 Volts, 3 Phase, 60 Hz, 18 / 9 Amp |
| Approx. Dimensions | 40" x 40" x 82" |
| Approx. Weight | 1320 Lbs |
Attachments
There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.
