Equipped With

17" X 60" ACRA MODEL 1760TE (3-1/8" BORE) PRECISION HIGH SPEED GAP BED ENGINE LATHE

Bed:
One-piece casting base.
Meehanite casting, vibration stress relieved.
Induction hardened and precision ground bed ways, precision hand scraped removable gap.

Foot brake.
Turcite B coating between bed and carriage.

Gearbox:
Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

Headstock:
Housing is vibration-absorbent, deflection-free.
Gears are hardened & MMG or REISHAUER ground.

Heavy Duty Spindle:
Machined from forged alloy steel, hardened ground & dynamically balanced.
Three point support by high grade precision, machine tool taper roller & ball bearings.

Apron:
RIH or LJH wheel can be available on request.
Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.

Carriage & Slide:
Anti-Float design backlash eliminator fitted in cross slide nut.
Safety clutch at feed shaft.
One shot lubrication in carriage & top slide.
Dual dials supply inch system screw.
Metric dial supply metric system only.

Safety Features:
Nylon safety gears in end train.
Shear pin in leadscrew.


Specifications:
Capacity:                                           17″/24″ x 60″
Swing Over Bed:                               17″
Swing Over Cross Slide:                   10-5/8″
Swing In Gap:                                   24-7/16″
Distance Between Centers:              60″
Center Height:                                  8-1/2″
Bed Width:                                       12-1/2″
Spindle Nose:                                   D1-8
Spindle Bore:                                   3-1/8″
Taper of Spindle:                              MT NO.5
Spindle Speeds – Steps:                  12 step
Spindle Speeds – Range:                 26 ~ 1,500 RPM
Cross Slide Travel:                            9.84″
Compound Slide Travel:                   5-13/16″
Inch Threads:                                   2~72 TPI
Metric Threads:                               0.2 ~ 14 mm
Longitudinal Feeds:                         0.0015 ~ 0.04″/rev
Cross Feeds:                                    0.00075 ~ 0.02″/rev
Tailstock:
     Quill Diameter:                           2-3/16″
     Quill Travel:                                5″
     Quill Taper:                                 MT NO.4
Spindle Drive Motor:                       10 HP
Voltage:                                            230V/460V AC / 3 PH
Weight                                             4800 lbs
Standard Equipment:
10″ 3-Jaw Chuck
12″ 4-Jaw Chuck
Full Length Splash Guard
Steady Rest/Follow Rest
Coolant System
Foot Brake
Work Lamp
Gap Bed
4 position square tool post
Tool box with tools