Equipped With

33" X 120" ACRA MODEL 33120FCH PRECISION GAP BED ENGINE LATHE


• Multi-Start threads indexing device.
• Forced lubrication system of Spindle is employed by a Pump.
• Drum type brake system for main motor connected to the pedal with a brake wire.
• Cross Slide is hardened and ground to prolong operational life.
• Spindle bore is 4-1/8″
• Spindle nose is D1-11
• Spindle is supported by three bearings.
• Rapid traverse for longitudinal
• Foot-operated braking system.
• Powerful and easy to operate Tailstock.
• Width bed is 560 mm (22.04”).
• Quill diameter is 100 mm(3.93”).
• Hardened and precisely ground.
• Tailstock body can easy to move by special design.


Specifications:
Capacity:                                    33″/46″ x 120″
Swing Over Bed:                        30-7/8″
Swing Over Cross Slide:             24″
Swing In Gap:                            46-1/16″
Distance Between Centers:       120″
Bed Width:                                22″
Spindle Nose:                            D1-11
Spindle Bore:                             4-1/8″
Taper of Spindle:                       MT NO.5
Spindle Speeds – Steps:            16
Spindle Speeds – Range:          12 ~ 1,200 RPM
Cross Slide Travel:                      21-1/4″
Compound Slide Travel:            8-5/8″
Inch Threads:                             2 ~ 28 TPI
Metric Threads:                         1 ~ 14 mm
Longitudinal Feeds:                   0.0024″~0.0337″
Cross Feeds:                              1/2 Half of Longitudinal Feeds
Tailstock:
     Quill Diameter:                      3-13/16″
     Quill Travel:                           11″
     Quill Taper:                            MT NO.6
Spindle Drive Motor:                  20 HP x 4P
Voltage:                                      220V/440V AC /3 PH
Weight                                        13,298 lbs

Standard Equipment:
• Dead Center MT#6
• Rapid Traverse
• Coolant System
• Work Light
• Tool box and Service kits
• Leveling screws and Foundation pads
• Multi-position length stop