65" X 600" ACRA MODEL 65600SHT PRECISION GAP BED HEAVY DUTY ENGINE LATHE

Manufacturer

ACRA

Model

65600SHT

Year

Not provided

Stock #

15497

Condition

New

Request A Quote

Keep Scrolling To Learn More

Specifications

Equipped With

65" X 600" ACRA MODEL 65600SHT PRECISION GAP BED HEAVY DUTY ENGINE LATHE

Gearbox:
• The Gearbox is entirely enclosed construction and provide a range of feedings or thread cuttings (inch, metric, module pitch and diametrical pitch).
• Inch and Metric threading without changing gears.
• Oil both lubrication and built in safety clutch safeguards the continuous and proper operation of the universal gear box.

Headstock:
• The Spindle is supported by high precision bearings suitable for both heavy and precision cutting.
• The speeds of spindle have 12 steps and designed on theoretical base. All gears and shafts are made of Ni-Cr-Mo steel and carbonize and ground.
• Control of main drive through electromagnetic brake, and automatic forced lubrication.
• Spindle Bore size wide selections-153 mm(6″), 230 mm(9″), 255 mm(10″), 310 mm(12″), 355 mm(14″), 405 mm(16″), 530 mm(21″).

Carriage and Apron:
• The Compound Rest can be fixed on the cross-side anywhere, convenient for cutting work application.
• The Apron gives automatic lubrication and locked safety device protect threads and feeding.
• Rapid Traverse drive for longitudinal-cross feeding and forward & reverse feed are operates very light and convenient.

Taper Attachment:
• The Taper Attachment is designed to easily operate and rapidly cut taper in high accuracy; the device can produce ± 10 angles.
• Electric cable in steel cover to protect wire from chips and prevent trouble with electric wires.


Specifications:
Capacity:                                      65″/86″ x 600″
Swing Over Bed:                           65″
Swing Over Cross Slide:                53″
Swing In Gap:                                86″
Width of Gap:                                22″
Distance Between Centers:            600″
Bed Width:                                     33″
Spindle Nose:                                 A2-15
Spindle Bore:                                  6″
Taper of Spindle:                            MT NO.6
Spindle Speeds – Range:                3~300 RPM
Cross Slide Travel:                           31-1/2″
Compound Slide Travel:                 16-1/2″
Rapid Travel Speed to Carriage:     80″/minute
Inch Threads:                                  1/4 ~ 30 TPI
Metric Threads:                               1 ~ 120 mm
Module Threads:                             0.25 ~ 30 mm
Diametrical Threads:                       1 ~ 120 D.P.
Longitudinal Feeds:                        0.004″ ~ 0.40″/rev
Cross Feeds:                                   0.002″ ~ 0.20″/rev
Tailstock:
     Quill Diameter:                          6″
     Quill Travel:                               13-3/8″
     Quill Taper:                                MT NO.6
Spindle Drive Motor:                      40 HP
Voltage:                                          230V/460V AC /3 PH
Weight                                           68,840 lbs
Dimensions                                    628 × 95 × 100 in

Standard Equipment:
Steady Rest
Electromagnetic Brake
4-Way Rapid Traverse
Center Sleeve
Center (M.T.6#)
Tool Post Wrench
Anchor Bolt
Tool Box & Tool
Coolant System
Halogen Light
 

Attachments

There are no files attached to this listing currently. If you Have any further questions regarding this listing, please contact us for more information.

Blumberg Machinery is proud to offer a slew of services from appraisals, financing, auction services, and more.

View All Services